The CDI 1002CF3 3/8″ Drive Computorq 3 Electronic Torque Wrench offers English Ranges in 10-100 Ft Lbs & 120-1200 In lbs and Metric Ranges of 13.6-135.6 Nm & 138-1382 KgCm. The COMPUTORQ 3 Electronic Torque Wrench is a simple to use digital readout wrench that displays real time torque values in any of four torque units, ft.lbs., in.lbs., Nm, kg.cm. Simply set the desired torque value and apply force until the green LED illuminates. This digital electronic torque wrench is great for light industrial, automotive, motorcycle, watercraft and aircraft applications. Check out the CDI Computorq 3 1002CF3HA if you are interested in a high accuracy option.
Features:
- Sleek design
- 15-degree flex ratcheting head.
- Push button socket release head.
- Large, easy to read digital display.
- Long battery life, uses 2 each CR123 lithium batteries.
- Ergonomically designed molded non-slip rubber grip.
- Torques in both clockwise and counterclockwise directions.
- Battery saving auto-shutoff after two minutes.
- COMPUTORQ 3 remembers last unit and torque setting selected.
- Audible tone sounds when set torque value is reached, if the set torque value is exceeded, an alarm tone will sound.
- 3 color LED light bar:
- YELLOW LED indicates approaching desired torque setting
- GREEN LED indicates desired torque value is reached
- RED LED indicates fastener was over-torqued, loosen and re-tighten.
- When desired torque value is reached, display will hold value and flash for ten seconds.
- COMPUTORQ 3 will operate in any of four torque units, foot pounds (ft. lbs.), inch pounds (in. lbs.), newton meter (Nm) or kilogram centimeter (kg. cm.).
- ACCURACY: ±2% CW of readings from 20% to 100% of full scale & ±3% CCW of readings from 20% to 100% of full scale.
- N.I.S.T. traceable certificate of calibration included.
- Drive: 3/8″
- Torque Range in. lb.: 120 – 1200 in.lb
- Torque Range ft. lb.: 10.0 – 100.0
- Torque Range Nm: 13.6 – 135.6
- Torque Range Kg.Cm.: 138 – 1382
- Length In. (mm) : 17 (432)
- Wt. Lbs. (kgs): 2.2 (1.0)