Productos
CDI 1002CASG Steel Grip Electronic Torque Wrench 3/8″ DR 5-100 FT LBS / 6.8-135.6 NM
CDI 1002CF3 Computorq 3 Electronic Torque Wrench 3/8″ DR 10-100 FT LBS / 13.6-135.6
CDI 1002CF3HA Computorq 3 Electronic Torque Wrench High Accuracy 3/8″ DR 10-100 FT LBS / 13.6-135.6
CDI 1002TAAG Torque & Angle Electronic Wrench 3/8″ DR 10-100 FT LBS / 12.6-135.6 NM
CDI 2401CI3 Computorq 3 Electronic Torque Wrench 1/4″ DR 24-240 IN LBS / 2.7-27.1 NM
CDI 2401CI3HA Computorq Electronic 3 Torque Wrench High Accuracy 1/4″ DR 24-240 IN LBS
CDI 2503CASG Steel Grip Electronic Torque Wrench 1/2″ DR 12.5-250 FT LBS / 16.9-339 NM
CDI 2503CF3 Computorq 3 Electronic Torque Wrench 1/2″ DR 25-250 FT LBS / 33.8-338 NM
CDI 2503CF3HA Computorq 3 Electronic Torque Wrench High Accuracy 1/2″ DR 25-250 FT LBS / 33.8-338 NM
CDI 501ED Electronic Dial Torque Wrench 1/4″ DR 5-50 IN LBS / .56-5.6 NM
CDI 6004CASG Steel Grip Electronic Torque Wrench 3/4″ DR 30-600 FT LBS / 40.7-813.5 NM
Mark-10 Cap Torque Testers Series TT01
Mark-10 (AC1086) Safety shield
Mark-10 3I Force / Torque Indicator
The 3i digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors. With exclusive Plug & Test™ technology, all calibration and configuration data is saved within the sensor’s smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with other Mark-10 indicators.
Mark-10 5i Force / torque Indicator
The 5i advanced digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors (see below). With exclusive Plug & Test™ technology, all calibration and configuration data is saved within the sensor’s smart connector, not the indicator, allowing for true interchangeability. Sensor password protection prevents use of an unauthorized sensor. In addition, all sensors are fully compatible with the more basic 3i force / torque indicator.
Mark-10 7i Force / Torque Indicator
The 7i professional digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors. With exclusive Plug & Test™ technology, all calibration and configuration data is saved within the sensor’s smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with other Mark-10 indicators.